Slobberjaws Spud Gun Site

Accessories 

This page will give the plans or instructions on how to make your gun more fun. Email me more ideas!

DoubleSpud

double spud.gif (5591 bytes)Click to enlarge.

The DoubleSpud double barreled barrel can be permanetly attached to a gun or, like I will give the plans for, be a Versa-Barrel System barrel (I suggest this).

Materials:

Quantity  Description (all PVC Sch. 40)
2 1.5" tees
3 pieces of 1.5" piping 3in. long
2 pieces of 1.5" piping 20in. long
1 1.5" end cap 
1 1.5" male threaded adapter
1 PVC purple primer and glue

Assembly goes as follows: (Please look at this first)

Prime and glue one of the 3in pieces of pipe and the male adapter together. Then prime and glue one of the tees to that (the perpendicular branch facing down). Prime and glue another 1.5" pipe stub into the perpendicular branch, then glue the other tee's perpendicular branch to the stub (make sure the top of the tees run parallel. In the end of the bottom tee facing the direction of the threaded cap glue the last 1.5" stub and prime and glue the end cap onto that. Take your 20 in pieces and glue them into the remaining parts of the tees.

Email me more ideas!